BAGGED PRODUCTS
GET IN TOUCH
DATA SHEET DOWNLOADS
Note:
1no. pallet holds 64no. bags (1,280kg)
Standard load holds 20no. pallets (pallets per load may vary subject to haulier trailer size).
POSTMIX
FP McCann Postmix offers a factory produced product that is fast setting and ready to use. Contents of each bag consists of blended sand and aggregates, Portland cement and special additives.
Features
- Available in 20kg bags
- Produced in a factory controlled environment – consistent high level quality
- All material required is contained with this bag. Adding additional material is not recommended
- Can be mixed by hand or with tradition mechanical mixer
Typical Application
- Gate Posts
- Fence Posts
- Line Posts
- Rotary lines
EASI-REPAIR™ – COLD LAY TARMAC
FP McCann’s Easi-Repair™ cold lay tarmac is a cost effective and efficient solution for temporary repairs to driveways, footpaths and a variety of other applications. Available in 25kg bags, tonne bags and in loose bulk, Easi-Repair™ is ready to use straight from the bag and does not require any further mixing. Produced in factory environment to maintain a consistent high level of quality.
Features
- Footpath Patch
- Temporary Ramping
- Driveway Repair
- Temporary Road Crossing
- Pothole Repair
- Cycle Way Repair
- Emergency Repair
- Trip Prevention Repair
*Only available in Northern Ireland
HIGH PERFORMANCE GROUT
FP McCann High Performance Grout is non-shrink, heavy-duty, single component, cementitious, high flow grout. It is a mix of granular aggregate, modified cements and other specifically selected additives. The flowable grout is suitable for a number of space filling applications where static loads are present.
Features
- Available in 20kg bags
- Produced in a factory controlled environment, ensuring a consistent and high-level quality
- Quick and convenient to use – just add water
Typical Application
Most commonly used for placing under:
- Machinery base plates
- Transformers
- Crane rails
- Handrails
- Bridge bearing pads
GENERAL PURPOSE MORTAR
FP McCann General Purpose Mortar is a factory produced mortar consisting of blended sand, Portland cement and special additives that conforms to BS EN 998-2 and meets the requirements of a designation III strength category (M4) mortar.
Features
- Available in 20kg bags
- Produced in a factory controlled environment, ensuring a consistent and high-level quality
- Quick and convenient to use – just add water
- All material required is contained within this bag – adding additional material is not recommended
Typical Application
- General repairs & maintenance
- Brick & block laying
- Pointing & patching
GENERAL PURPOSE CONCRETE
FP McCann General Purpose Concrete is a factory produced 25N General Purpose Concrete that is ready to use straight from the bag and suitable for a wide variety of uses.
Features
- Available in 20kg bags
- Produced in a factory controlled environment – consistent high level quality
- Quick and convenient to use, just add water
- All material required is contained with this bag. Adding additional material is not recommended
- Can be mixed by hand or with tradition mechanical mixer
Typical Application
- Repair & maintenance
- Paths & Steps
- Foundations and garden shed/greenhouse bases
HIGH PERFORMANCE CONCRETE
FP McCann High Performance Concrete is a ready to use, pre-mixed 40N concrete, made up of cement, dried sand and aggregates, along with other additives. It is factory produced and ideal for projects requiring a higher strength. FP McCann High Performance Concrete is available in 20kg bags.
Features
- Simple to use
- Just add water – no mixing needed
- 40N strength in 28 days
- Factory produced product, meaning premium and consistent quality
- Showerproof, recyclable plastic packaging
Typical Application
- Concrete bases for sheds and greenhouses
- Can be used for external and internal applications
- Steps
- Pathways
- Maintenance and repair projects
- Structural concrete
HIGH STRENGTH BEDDING MORTAR
FP McCann High Strength Bedding Mortar is a blend of carefully selected sands, cements and additives to give a high strength, low shrinkage, easy to finish precast installation mortar. It is chloride-free and safe to use with steel reinforcement to pack and fill gaps from 10 to 75mm providing structural support without the need for shuttering.
Features
- Simple to use
- High Strength
- Low Shrinkage
- Factory produced product, meaning premium and consistent quality
- Showerproof, recyclable plastic packaging
THIXOTROPIC PUMPABLE MORTAR
FP McCann Thixotropic Pumpable Mortar is a blend of carefully selected sands, cements and additives to give a high strength, low shrinkage, easy to use precast installation jointing mortar. It is chloride-free and safe to use with steel reinforcement to pack and fill gaps from 10 to 100mm.
Features
- Simple to use
- High Strength
- Low Shrinkage
- Factory produced product, meaning premium and consistent quality
- Showerproof, recyclable plastic packaging
Landscaping Range
PAVING MORTAR
FP McCann Paving Bedding Mortar is a fine bedding mortar specifically formulated to provide exceptional performance with all types of stone, concrete and porcelain paving units. Suitable for use in domestic, commercial and public realm applications with its high strength to receive both foot and vehicular traffic.
